C.B.Training Institute

TESTIMONIALS: HVAC

Feedback for Module 5 - December 2009 Batch

I would like to thank you for sharing your knowledge and experience with us. It was a very good experience for me, I came to know lot more in HVAC systems. Now I am feeling much more confident in problem solving and to compete with the current market. And now I can solve Heat load calculation & Psychrometric related problems independently.

Though I did not have exposure to Air side application like AHUs selection, Fan selection etc in my current working area, after attending the training It is very much clear for me.

I would definitely like to suggest my friends and colleagues to attend the training programs conducted by You.

- Latif – Armstrong Pumps

It was a great experience and good interactive sessions conducted. The presentations were very informative and examples which you shared out of your experience definitely added value to the course.

Now, I am confident about psychrometrics and also heat load calculations. The material provided is good covering all basics and helps to keep as a quick reference guide.
Also, I thank for Mr Raghu for spending his valuable time and getting us an idea on career planning and Mrs. Shobha , for giving good idea on electrical system for AC plants.

Deepak Prabhakar - Armstrong Pumps

If anybody wants to learn HVAC design techniques, it should be from Mr. Mahesh kumar sir from CB Training Institute, He is an excellent teacher, and he is having indepth knowledge in this HVAC field. and moreover he is a very humble, sincere trainer.

- Vijay

We were really happy to be a part of this training session, the session was very helpful for us in all aspects, especially the basics of HVAC and psychometric were really dealt well which gave us an insight into the whole subject. Heat load estimation was really helpful for us in dealing with different requirements of our clients. This session will be of great help for my future.

Akmal and Divyashree - Suraj Mani Engineers Pvt. Ltd.

Training program in CBTI was worth more than the amount what we paid. I have gained lot of knowledge from this training. I would like to thank Mahesh sir for his hearty coaching.

Vinay Prahlad - Armstrong Pumps

I have really enjoyed your class. The presentation was good. The way you teach is really too good. Pl increase the duration of the course. In the short time you available have covered so many topics. In the future I will definitely will be in touch with you for further knowledge.

Md. Wasim Raza - BROSBEL ENGINEERING

The training programme was really useful for me. The training content was really good added to your very good presentation. On a whole the Presentation was EXCELLENT and the examples / situations you narrated were also good in understanding the Practical aspects of these contents.

The course has helped me in understanding the layout and schematics more. Earlier I never used to analyse the schematics or layouts and just carry whatever it is designed for but now knowing the basics and the layouts I am possible to analyse and suggest my ideas for improving the plant capacity .

The course timing was bit too short considering the course content u have put up. The content required more timing with many more problems to be analysed or solved apart from the problems we have done. Pl increase the course duration to allot more time to problem solving sessions in Heat load and Psychrometrics.

Other contents were excellent and up to the mark. Also pl include videos , animations etc if possible.

Sir also i would ask you to conduct a lecture on Equipment selection , VAV systems , Process Cooling , and also ELECTRICAL part of HVAC apart from the one arranged for us which gave an insight into the electricals.

Varun Nambiar – ETA Engineering

Name: Mr. Jiben C Kurian – Suraj Mani Engineers – Authorized Blue Star Dealers, Bangalore.

Components of various systems were explained well.

Name: Mr. Shaktivel – ETA, Bangalore.

Training was excellent and interactive. More problems need to be solved. Please try to have classes every day for 2 – 3 hours to maintain continuity. Give problems and exercises to solve at home for practice.

Name: Mr. Vardharaj. D – ETA, Bangalore

More detailed session on pump head calculations and fan static calculations required.

Name: Mr. Praveen – Voltas, Bangalore

Have been doing heat loads but am able to understand the process and the importance of the factors used in the Heat load calculations better now. Diversity factor was well explained.

Name: Mr. Avinash Kumar – Magna cool, Bangalore. Authorized dealer for Blue Star.

Basics were explained well. I am from electronics back ground, and this course helped me to understand the basics of thermodynamics and Heat transfer very well.

Name: Mr. Lokesh. R.S. – Sneha Enterprises, Bangalore. Authorized Dealers for Blue Star.

Heat load calculation was very well understood. Lectures were good. Have worked in split units and package unit segment only. This course helped me get exposure to the design aspects of chilled water plants.

Name: Mr. V.Rajesh – Aircon Systems, Bangalore. Authorized Dealer for Voltas.

Lectures were excellent. But if a site visit could have been included it would have been very helpful.

Name: Mr. Syed Muttur Rahman – KH Aircon, Bangalore. Authorized dealer for LG.

Heat load estimation is very clear. Site visit is required. More detailed session on pump and piping required. Air distribution system and ducting Design was well explained.

Name: Mr. Arvind. B.T – W S Atkins, Bangalore.

Everything was explained well. Practical aspects were very well explained. More problem solving required.

Name: Mr. Harish T.S – Cryogenics- Authorized dealers for Blue Star.

Had no exposure to chiller plants as was involved in DX systems only. This course gave me a good exposure to chilled water plants.

Name: Mr. Vivek- Cold Air, Bangalore. Authorized dealers for Voltas.

The course was wonderfull.Had no exposure to chiller plants. Got an exposure to various aspects of chiller plant.

Name: Mr. Ashok S. Ayer – Blue Star, Bangalore.

I benefitted a lot from the program. I am able to work independently now and iam more confident in facing the clients and answering their queries.

Name: Mr. Arvind Kumar – Suraj Mani engineers.

The program was very helpful. The course content was well planned. The fundamental concepts like psychrometrics were made very clear.

Course for Dealers of M/s Blue star – 22.6.09 – 28.6.09

1. Please conduct longer courses. – Mr.Muthuraj – Sneha Enterprises

2. I have attended courses in other institutes. This course was much better and the course content was more. – Mr. Anupam – Generic Systems

3. It was a very good learning experience. It would be better if course duration is increased. – Mr. Prasad – SME Engineers

4. It was a very good learning experience. – Mr. Satyanarayana. – Cool Air systems

5. I am involved in sales and annual maintenance contracts. It was an excellent programme. It will be useful if you introduce recap sessions after every topic. It will be helpful if you can increase the course time and increase time allotted for solving problems. – Mr. Roshan - Cryogenics

6. I had studied ACR in college and have also attended 2 programmes earlier. Problem solving session was very useful. Time was very well managed. - Mr.Manmohan. VAC Design Engineers

7. The course was very helpful. Can u please add an interactive session for problems faced in the field. - Mr.Sudeep. ALPHA Air conditioners

8. I am from commercial background and am involved in sales. This course helped me understand the Fundamental Concepts. It was a very good course. – Mr.Sudarshan. Aravind Airconditioners

9. This was a very useful course. Now I am able to understand the factors used in the heat load calculations and its significance. - Mr.Subhendu Magnacool Engineers

Feedback received from the Batch conducted in August 2009

Training material was very good. The presentation was lucid. Overall the programme was excellent. Can u please introduce application specific modules like clean rooms, etc. It would be very useful if you conduct a separate programme for Service personnel. – Pant. Param Designs

The presentations and the course was very good. It will be useful if you can include a site visit. - Satish. – Ace Air Systems

This was a fantastic course. Slide show of Air Handling Units manufacturing process was very useful. Rizvin. - Magnacool Engineers

It was a very good and helpful course. Please add more photographs to help freshers visualise equipment – Girish - Fresh Graduate - Davangere

The course was very good and extremely useful. Pl add special applications like clean rooms, hospitals etc. – Sudarshan - ETA Engineering.

It was a very good course – Shiju – Magnacool Engineers.

It was a very good course. Pl increase the time allotted for solving problems. – Raghavendra – ETA Engineering.

It was a very good course. The material was very good. – Raja – Prime Group Associates.